Grade One Rubber Speed Bump, Speed Hump with CE
| Size |
500*350*50mm |
| Color |
Yellow and Black |
| Weight |
16.5kg |
End cap size |
170*350*50mm |
| Origin |
Zhejiang, China (Mainland) |
Payment Terms |
T/T, ,L/C, Western Union,etc
30% as deposit, balance before shipment |
Delivery time |
7- 15 days after receiving your order and payment |
Supply Ability |
10000 meters a month |
| Feature |
(1)They are very easy for bicycles to cross if designed appropriately.
(2)Its modular design makes it very easy to install.
(3)Available in Yelllow and Black combination for greater visibility.
(4)UV, moisture and temperature resistant.
(5)Modular design provides flexibility to suit any size of road.
(6)Reflectors and glass elements provides better night visibility.
(7)Speed Bumps are grooved for drainage of the rain water. |
Additional Info.
Trademark:Aroad
Packing:Woven bag
Standard:CE
Origin:Zheiang, China
HS Code:40169990
Production Capacity:10000 meter/Month
Product Description
1) Moulded from recycled rubber, Tough, durable rubber material.
2) Available in black and yellow colours, the yellow is not painted on but yellow rubber compound comressed to the Bump.
3) Effective speed reduction.
4) Easily installed.
5) Contrasting colours and reflectors for visibility day & night.
6) Surface tread ensures grip even when wet.
7) Easily adjusted to site conditions.
8) Highly suitable for permanent & temporary installations.
9) Suitable for HGV's
Product Picture
Factory Picture :
Q&A.
Q. Why do we have speed humps?
A. Speeding on residential streets is a common complaint of concerned citizens. Although enforcement of speed limits by police departments is an effective means of reducing speeds, limited resources do not allow such enforcement on a regular and permanent basis. Research has shown that speed humps are an effective approach to slowing down traffic on residential streets.
Q. What is a speed hump and how is it different from a speed bump?
A. A speed hump is a gradual rise and fall of the pavement surface along the roadway extending across the pavement width. Generally, speed humps used on residential streets are 12 to 22 feet long with a maximum height of 3 to 4 inches. Speed "humps" are different from speed "bumps", which are seen in many private parking lots. A speed bump is abrupt, having a height of 3 to 4 inches over a length of 1 to 3 feet. Speed bumps cause most vehicles to slow down to almost a stop to go over it. Speed humps, on the other hand, are designed so most vehicles can go over them at 20 mph without causing driver discomfort.
Q. How are speed humps effective in controlling speeds?
A. Speed humps cause a gentle vehicle rocking motion that causes driver discomfort, thus resulting in most vehicles slowing down to 20 mph at each hump. Depending upon street geometry, speed humps are placed every 200 to 600 feet. The presence of speed humps causes drivers to slow down at the humps and in between properly spaced successive humps. Speed humps have the advantage of being self-enforcing. They are sometimes referred to as "sleeping police officers".
Q. What will happen if I go over speed humps at high speeds?
A. At high speeds a speed hump can cause significant driver discomfort. At such speeds it can act as a bump and jolt the vehicle's suspension and its occupants or cargo.
Q. Do speed humps reduce cut-through traffic?
A. The primary purpose of speed humps is to reduce the speeds of vehicles traveling along a roadway. Traffic diversion due to speed humps is a side effect which may or may not result. A possible disadvantage of speed humps is that motorists may avoid the speed humps by using other nearby streets in the area.
Q. How is a driver warned of the presence of speed humps?
A. On any street with speed humps, warning signs such as "Road Humps Ahead" are placed before the beginning of each series of humps. These signs also indicate the speed at which drivers are advised to travel over the hump. To be properly visible, the speed hump is marked with diagonal white stripes.
Q. Can speed humps be placed on any street?
A. Speed humps are placed only on residential streets with not more than two lanes and with a speed limit of 30 mph or less. For safety reasons, speed humps are not installed within sections which are curved or where the street slopes uphill/downhill. Speed humps are not typically installed on streets where emergency facilities are located. The Department of Public Works and Transportation communicates with the Austin Fire Department and Emergency Medical Services to ensure that the speed humps will not greatly impact their services. Increases in response time of approximately 2-10 seconds per hump may exist with the installation of speed humps.
Q. What are the different types of speed humps?
A. There are two different speed hump designs used by the City of Austin: 1. The circular speed hump, which is 12 feet long, and used on those residential streets which provide access to multiple streets in the neighborhood. 2. The flat-topped speed hump, which is 22 feet long, used on local streets within the neighborhood.
Q. How can I get speed humps on my street?
A. Neighborhood Traffic Calming Program
Company Profile
Sanmen Aroad Traffic Facility Factory -- Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of " Quality first, service first, continuous improvement and innovation to meet the customers" For the management and " Zero defect, zero complaints" As the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
Our main products: Rubber speed hump, traffic cone, cable protector, corner guard, anti-impacted block, wheel stopper, traffic sign, warning post, delineator, reflective vest, reflective tape, road stud, convex mirror, anti-impacted barrel, traffic barrier etc.
We have a self-operated factory with 30 workers, a self-operated foreign trade company and a professional foreign trade team of 20 people. And more than 30 enterprises and institutions have reached cooperation, with more than 200 molds and more than 50 injection and vulcanization equipment.
Have all kinds of export certificates, CE, ROSH, GSG, TUV, etc.
Export products to the United States, Canada, Mexico, Brazil, Chile, Colombia, Argentina, Japan, Korea, Singapore, Malaysia, Indonesia, Philippines, Thailand, Vietnam, India, Israel, Egypt, South Africa, Germany, Italy, Spain, United Kingdom, Belgium, Russia, Portugal, Australia, New Zealand and other countries.
1. More than 30 years OEM experience
2.1 year quality warrenty
3. Support verious payment method
4. Support different transportation
5. Small order also can be available
6. One stop service can be required
We sincerely expect your cooperation.
Audited Supplier 
){kind=link}
){kind=link}